Sherri's Helpful Hints

GUIDE TO BUYING OLD OR NEW FURNITURE

When buying case goods:

1. Make sure you know the difference between hardwoods and softwoods. Hardwood comes from a broadleafed, or nonneedled tree, like maple, cherry or mahogany. These woods have strength or stability; but those qualities can make hardwoods difficult to work with for intricate carving and detail work. Softwoods come from needle-bearing trees such as pine or cedar. They are easily carved or worked. Since their surfaces are often soft, they are more susceptible to marks and dings, which may result in a weathered or worn quality that is appropriate or appealing in certain pieces.

2. Make sure you know what "solid wood" means. "Solid wood" means that all exposed pieces of the piece are solid, but those areas hidden from view may be something else.

3. Make sure you know why using plywood may be your best bet! Solid wood has a tendency to expand and contract as the humidity changes and does not offer the needed stability when constructing the large flat panels (like table tops or cabinet sides). Plywood or particle board (made of ground up wood) is significantly more stable and less apt to warp or split. These panels will often be framed in solid wood and covered by veneers to recreate the look of one large piece of wood.

4. Make sure you know what "veneering" is. Veneer is the use of thin layers of highly decorative woods on top of plywood, particle board or medium-density fiberboard (MDF). Veneering makes it possible to match grain patterns or use inlays to create designs that mother nature can't produce in solid wood. But beware of cheaper furniture which reproduces wood grain photographically. If it is photographic, the grain will be perfect, with none of the flaws of nature, and the grain will have no natural variations.

5. Make sure drawers are dovetailed and jointed securely, have glides and stops, glide easily when, have dust panels and are smooth and snag free inside.

6. Make sure doors swing open easily without squeaking or rubbing and that long doors are attached with study hinges.

7. Make sure tables have a heavy balanced feeling when rocked, that the leaves fit properly and that the leaves match grain and finish of table.


When buying upholstered furniture:

1. Make sure that the piece has adequate padding with no harsh underlying wood edges, especially on the arms. If the fabric is directly touching the wood with no padding, the piece will quickly wear at that point.

2. Make sure the patterns are matched at the seams, on front edges and on back cushions. Matched patterns are usually a sign of higher quality.

3. Make sure the stitching is tight and that no areas are separating (and no stuffing is hanging out!).

4. Make sure the frames are constructed of a kiln-dried hardwood for durability.

5. Make sure the frame is joined using dowels as well as corner blocked, glued and screwed together.

6. Make sure you check the type of springs. Eight-way hand-tied springs are used in the base of better quality pieces. These springs are three-dimensional coils attached to webbing on the bottom of the upholstered piece and tied with twine at the top to each of the eight adjacent coils to keep them from shifting. The result is an even comfort level which never "bottoms-out" even when your linebacker friends sit on it. Sinuous springs are two-dimensional "S" shaped wires that are fastened to the top of the front rail and run down the back of the piece every few inches apart. The result is a somewhat "mushier" seat and is less costly.

7. Make sure that you choose fabrics that will wear well if you have a family. Keep in mind that, as a rule, tightly woven fabrics wear best. For durability, chose a high thread count fabric - meaning that the number of threads per square inch is high. Another general rule is that fabrics which have their pattern woven in wear better than printed fabrics.

8. Most important, make sure you sit in the piece. It may be beautiful, but can you bear to sit in it for any period of time?


Before buying furniture:

1. Make sure you know how it will be used and how long. You don't want to spend a lot of money on a baby crib you will use for only a short time, while budgeting just a little on table that will be used for many years.

2. Make sure you know how much space you have. Don't choose furniture that will overwhelm a small space or get lost in a large one.

3. Make sure you decide what style you want. Casual (overstuffed sofas, earthy colors, and softwoods, such as pine); contemporary (bold colors, sharp lines, metal and glass); country (soft cushions, floral prints, distressed and painted wood); traditional (damask and chintz, cherry and mahogany woods); or a combination of all?

4. Make sure you know how much you can spend.

5. And make sure you do some planning before you go shopping. Decide what colors you like, what texture would work best for your family and whether you want patterns, stripes, checks or solids. Look at design websites such as Home and Garden Makeover for tips on what furniture would look best for your room size and lifestyle.
Buying furniture should be fun and creative! Just make certain that you know what you are buying and why! And another tip: Ask yourself if you will still like this piece ten years from now? If not, it will probably not be worth the investment today.